中文
EnglishApplication of nitrogen in plastic molding industry
Nitrogen is the key to the success of plastic manufacturing. Nitrogen helps
prevent discoloration and oxidation during manufacturing. In addition,
it helps maintain the strength of plastic polymers, which is particularly
important when using large molds
Nitrogen generator for Puf panels with a purity of 99.9% and a working pressure of 140 m3/h at 6 KG/CM2
![[Suzhou XITE Gas] Nitrogen generator for Puf panels with a purity of 99.9% and a working pressure of 140 m3/h at 6 KG/CM2](http://crm.xtgcqt.com/Upload_Files/ZiXunsmallPic/2022-8/2022081510353115252_650.png)
Suzhou Schitt has installed a 140 m3/h nitrogen generator with 99.99% purity and 6 KG/CM2 working pressure for the Puf panel.
XITE PSA nitrogen generators have low capital and operating costs， with start-up times of only 10 to 15 minutes， capacities from 5 m3/h to 500 m3/h， purity from 99% to 99.9998% (2PPM) and discharge pressures ranging from 5 Kg/Cm2 to 7. 5 Kg/cm2， with higher pressures available via BOOSTER up to 30 Kg/cm2 and 150 Kg/cm2. Kg/cm2 XITE has installed equipment for PUF PANEL manufacturing; XITE nitrogen equipment is designed and manufactured according to the process requirements of PUF PANEL manufacturing.
The range of products sold by Suzhou Schitt for PUF PANEL are
Model | Capacity m3/h |
XTFD-150 | 140 m3/h |
