In today's electronic manufacturing， everything is about using surface mount technology. These devices are not only safer and easier to produce than previous lead-containing devices， but also perform better as long as they are manufactured under the right conditions. This is where nitrogen generators for on-site gas systems come in.

Why make electronics with nitrogen?

It is no secret that the manufacture of electronic products is complex， and the process requires precision and error-free. Nitrogen engineering ensures this state of perfection in three ways:

Maintain an ideal atmosphere - Electronic manufacturing requires very specific temperatures and environments to work successfully. Both effects can be achieved and maintained throughout the working day using nitrogen.

Clear results - Pure nitrogen is also required in the manufacturing of electronic products to ensure surface finish. It reduces the amount of scum formed during welding and reduces the surface tension so that the solder falls off cleanly.

Preventing oxidation - In convection reflux welding and selective welding， nitrogen is essential to remove oxygen from the air， otherwise oxidation may occur which weakens the solder. When nitrogen is used， the amount of oxygen is greatly reduced， so the integrity of the solder can be maintained.

Why use a field nitrogen generator?

The demand for nitrogen in the electronics industry is obvious， as is the demand for field nitrogen generators from the field gas system when you disassemble them. The reasons are as follows:

Eliminate Dependency - When electronics manufacturers need nitrogen， they usually rely on it for delivery. However， this causes their supply to depend on others and usually requires contracting. With on-site nitrogen generators for on-site gas systems， electronics manufacturing companies are able to produce their own nitrogen supply. This means they always get it when they need it， and they don't have to worry about getting nitrogen cylinders or their logistics.

Field Nitrogen Generators Reduce Costs - Getting a field Nitrogen Generator from the field gas system does require a pre-paid cost， but even the Surface Mount Technology Association believes it is worth it. Fewer repairs are required because nitrogen improves the quality of electronics manufacturing ten times. You can further increase your savings by producing nitrogen on-site and on-demand. In a short time， on-site nitrogen generators will pay for this by significantly reducing nitrogen demand.

Field nitrogen generators for field gas systems are well suited for electronic manufacturing. It not only improves product quality and facility efficiency， but also eliminates the need for nitrogen transfer.

If you are ready to experience the ease of use and cost savings available from the on-site nitrogen generator， please contact the on-site gas system immediately.

PDF file download   Word document download

Knowledge of high purity gases in the semiconducto

Application of nitrogen generator in electronic in

For more information, please consult our professionals for the best solution. Tel: +86 18112526805

【Please indicate the source for reprint: www.xitegas.com】